You are in: water treatment

Address:
Galway Water Solutions,
Colmanstown,
Co. Galway,
Ireland.

Contact Details:
Lo-call: 1890 222 000
Fax: 09096 77067
Mobile: 087 764 0202
Vehicle: 086 40 74904

Water Treatment

The definitions of water treatment from Wiki are as follows ...

Water treatment describes those processes used to make water more acceptable for a "desired end-use" or for a particular function or job.

These can include water use as drinking water, industrial processes, medical and many other uses (these can also include water just used for domestic and bathing functions within the household or gardening outside the household).

The goal of all water treatment process is to remove existing contaminants in the water, or reduce the concentration of such contaminants so the water becomes fit for its desired end-use. One such use is returning water that has been used back into the natural environment without adverse ecological impact.

The processes involved in treating water for drinking purpose may be solids separation using physical such as settling and filtration, chemical such as disinfection and coagulation.

Biological processes are also employed in the treatment of wastewater and these processes may include, for example, aerated lagoons, activated sludge or slow sand filters.

Potable water purification - Water purification is the removal of contaminants from untreated water to produce drinking water that is pure enough for its intended use, most commonly human consumption. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, minerals such as iron, manganese and sulphur, and man-made chemical pollutants including fertilisers.

It is important to take measures to make available water of desirable quality at the consumer end. That leads to protection of the treated water during conveyance and distribution after treatment. It is common practice to have residual disinfectants in the treated water in order to kill any bacteriological contamination after water treatment.

World Health Organisation (WHO) guidelines are generally followed throughout the world for drinking water quality requirements. In addition of the WHO guidelines, each country or territory or water supply body can have their own guidelines in order for consumers to have access to safe drinking water.

Processes for drinking water :

The combination of following processes is used for municipal drinking water treatment worldwide:

* Pre-chlorination - for algae control and arresting any biological growth

* Aeration - along with pre-chlorination for removal of dissolved iron and manganese

* Coagulation - for flocculation

* Coagulant aids also known as polyelectrolytes - to improve coagulation and for thicker floc formation

* Sedimentation - for solids separation, that is, removal of suspended solids trapped in the floc

* Filtration - removing particles from water.

* Desalination - Process of removing salt from the water.

* Disinfection - for killing bacteria

There is no unique solution (selection of processes) for any type of water. Also, it is difficult to standardise the solution in the form of processes for water from different sources. Treatability studies for each source of water in different seasons need to be carried out to arrive at most appropriate processes.

The above mentioned technologies are well developed and generalised designs are available which are used by many water utilities (public or private). In addition to the generalised solutions, a number of private companies provide solutions by patenting their technologies.